string(10) "newsevents"
August 30, 2012

Cross-Layer Design of Smart Antenna Systems

  • April 21, 2024 till April 21, 2024
  • Main Lecture Room

(This lecture is part of the Distinguished Lecturer Programme of the IEEE Antennas and Propagation Society)
Smart Antenna Systems use the additional degrees of freedom offered by their multiple antennas to exploit, among other things, multipath in the propagation environment. Therefore, by construction, antenna design of smart antenna systems cannot be assessed by simple performance metrics such as gain, polarization and efficiency alone. At a minimum, performance has to be considered in the context of the nature and degree of the multipath. Capacity, the maximum possible throughput, is an appropriate performance metric when the antennas are properly combined with their propagation environment but nothing more is known about the system. When, additionally, the specific Link and Media Access Control (MAC) layer characteristics of the system are taken into account, the actual throughput of the communication link becomes a more appropriate performance metric. A Cross-Layered design approach of Multiple Input Multiple Output (MIMO) antenna systems is presented in this talk. An electromagnetics exact formulation from baseband-to-baseband of a Smart Antenna System is given. The formulation consists of full wave analyses of the antenna arrays involved on both sides of the link and a plane wave decomposition for the propagation environment. Subsequently, the baseband signals are fed into link simulators, specific for each system of interest, to provide estimates of the Bit Error Rate (BER) and throughput.
Calibration and Channel estimation algorithms are described for Time Division Duplex (TDD) systems, such as the IEEE 802.16 (WiMAX). The state of the art in designing antennas for terminals and for base stations is outlined. Examples of actual product designs for WiMAX and IEEE 802.11n are also given.

Talk slides in pdf [45KB]

Skip to content